Fixed Bends & Straight Housings

Offer both fixed bend and straight housings. Both are a two-piece designs. One piece available upon request.

Features:

The fixed bend housing has the bend angle machined into the housing.
The bend point is 55" and 56" for 5", 5 3/8", 5.50", 6.63" and 7" motors. The 8.25" motors are 60"
By running a lower bend point, less stress is induced on the motor components minimizing the potential for component damage to the motor.
The straight fixed housing is used for the pin down Rotary Steerable assist motors and is available upon request.
We also have a variety of Integral Blade, Slick, and hard Banded housings

Fixed Bend Housing